[have given up] - Cannot use pictures with image browser

dick265 · Post by **dick265** » Sun 5. Feb 2006, 12:32

Hi
I can upload images with filke manager (PHPWCMS v 1.2.5)
I can see the directory listing of all uploaded files.
I cannot inspect any iamges anymore. Eiter filemanager crashes or I see a completely different figure
I cannot use the images in article centre: the image browser does not show any images
The backend crashes regulary when trying to work with images and/or filemanager.

Any ideas where to start looking?

Dick

dick265 · Post by **dick265** » Sun 5. Feb 2006, 15:30

hi
when trying to look up images, I get an ID[1] error
I then have to re-login.
this could explain the crashes . . .
all directories are set on 777.

does this help?

Pappnase · Post by **Pappnase** » Sun 5. Feb 2006, 15:34

hello

please update to the latest release.

777 to all dirs don't solve the problem! it could be an pathproblem it could be a hostproblem, missconfiguration......

Martijn · Post by **Martijn** » Wed 8. Feb 2006, 11:36

I never found the direct answer to this problem. I've found this thread:

When I followed all steps, it worked fine for me!

Pappnase · Post by **Pappnase** » Wed 8. Feb 2006, 15:37

Martijn wrote:I never found the direct answer to this problem. I've found this thread:

When I followed all steps, it worked fine for me!

hello

how will you solve an problem i you don't write where's the problem. with correct error messages ?

Martijn · Post by **Martijn** » Wed 8. Feb 2006, 18:06

I know, i know

I totaly misunderstood the problem cause of my bad english, sorry about that!

My problem had something to do with the FCKeditor and using images in there...

Pappnase · Post by **Pappnase** » Wed 8. Feb 2006, 18:07

Martijn wrote:I know, i know
I totaly misunderstood the problem cause of my bad english, sorry about that!

My problem had something to do with the FCKeditor and using images in there...

hehe

my english is also not so good! so don't care!!

dick265 · Post by **dick265** » Thu 9. Feb 2006, 09:15

Hallo
auf Deutsch dann:

Ich habe V1.1RC4 und v 1.2.5DEV.
RC4 functioniert einwandfrei
1.2.5DEV benutzt die geleiche Daten und Images, hat aber 2 Probleme:

1 in file manager kan ich alle Images (die mit 1.1RC4 hochgeladen sind) sehen, dass heist der Filename und der Directorystructur.
Ich kan di Images aber nicht in der 1.2.5 Imagebrowser sehen. Da kriege ich Kein Bild, nur eine Name. Wenn ich so ein Image 'download', dan crahst das System.
Ich kan aber ni 1.2.5DEV ein Image hochladen, speichern, und mich anschouen in Image Browser
2 Ich kan in 1.2.5DEV Article Centre kein einzige Image in ein Article eintragen. Ich bekomme zwar denn Directorystructur, aber keine einzige Image. Obwohl die da sind.

Alles auf neu installieren ist naturlich eine option, aber fuer ein einfache benuetzer wie ich den letsten Ausweg . . .. . .

Wenn es sein muss muss es sein naturlich

Dick

Pappnase · Post by **Pappnase** » Thu 9. Feb 2006, 09:17

hello

did you set the images visible and public!?

dick265 · Post by **dick265** » Fri 10. Feb 2006, 08:44

jawohl, alles ist visible and public.

dick265 · Post by **dick265** » Mon 13. Feb 2006, 17:04

Hi
followed on on the treat mentioned.
Found this remark

[quote]/* path to FCKeditor-Filemangers upload default 'picture/upload' from root
if you have installed phpWCMS in a Subfolder like cms change it to
cms/picture/upload
!!! no Slash at front and end '/cms/picture/upload/' will not work !!!

Where do I make this statement?

dick265 · Post by **dick265** » Thu 16. Feb 2006, 15:44

Hi you all
if I use these settings in 1.2.5.DEV conf.inc.php
$phpwcms["compress_page"] = 0; //0 = OFF, 1-9: page compression ON (1 = low level, 9 = highest level)
$phpwcms["imagick"] = 0; //0 = GD, 1 = ImageMagick, 2 = ImageMagick 4.2.9
$phpwcms["imagick_path"] = ""; //Path to ImageMagick (default="" - none)
$phpwcms["use_gd2"] = 0; //0 = GD1, 1 = GD2
$phpwcms["rewrite_url"] = 0; //whether URL should be rewritable
$phpwcms["wysiwyg_editor"] = 2; //0 = no wysiwyg editor, 1 = HTMLarea, 2 = FCKeditor, 3 = browser based
then what I upload in filemanager is there, visible and also usable in image browser and in article centre.

This data then is not usable in version 1.1 RC4.

The same way goes in the alternative direction
1.1 RC4 is set up like this (conf.inc.php)
$phpwcms["compress_page"] = 0; //0 = OFF, 1-9: page compression ON (1 = low level, 9 = highest level)
$phpwcms["imagick"] = 2; //0 = GD, 1 = ImageMagick, 2 = ImageMagick 4.2.9
$phpwcms["imagick_path"] = ""; //Path to ImageMagick (default="" - none)
$phpwcms["use_gd2"] = 0; //0 = GD1, 1 = GD2
$phpwcms["rewrite_url"] = 0; //whether URL should be rewritable
$phpwcms["wysiwyg_editor"] = 1; //0 = no wysiwyg editor, 1 = HTMLarea, 2 = FCKeditor, 3 = browser based

Here i can use filemanager, upload etc. I can use images via Image Browser.
I cannot however use 1.2.5 images.

is there a way to use images on both systems, 1.1 RC4 as well as 1.2.5 DEV?

supervise-it · Post by **supervise-it** » Fri 3. Mar 2006, 09:57

Hi,
ich hatte ein ähnliches Problem. Check doch mal ob das PHP auf dem server im Savemode läuft.

gruss

dick265 · Post by **dick265** » Wed 5. Apr 2006, 23:29

stopped trying

this is a waste of time for me (since I do not know what I'm doing in PHP. .

)
Will stick to 1.1 RC4, it is stable and working. Why bother?
I've choosen a CMS to focus on content, not on PHP specials.

Thanks anyway for the help and advice given

Pappnase · Post by **Pappnase** » Thu 6. Apr 2006, 14:36

dick265 wrote:stopped trying
this is a waste of time for me (since I do not know what I'm doing in PHP. .)
Will stick to 1.1 RC4, it is stable and working. Why bother?
I've choosen a CMS to focus on content, not on PHP specials.
Thanks anyway for the help and advice given

hello

sorry guy but this has nothing todo with php more with the setup. and if you give up now. you will also give up on any other system.

read slowly the update docu and run teh upgrade then it should work! but do not forget to make an backup!

[have given up] - Cannot use pictures with image browser

[have given up] - Cannot use pictures with image browser

id [1] failure

where is FCKeditor config file?

PROGRESS!!

Save Mode

have given up

Re: have given up