phpwcms Support Forum

hallo und guten abend

ich habe recht viel im forum gesucht, aber trotzdem noch nicht verstanden, wie ich dieses wundervolle slideshow-dingens benutzen kann. das wäre toll, wenn es funktioniert. kennt sich jemand damit aus?

in der wiki habe ich gelesen, dass eine basic-version da sein soll?
http://www.phpwcms-howto.de/wiki/doku.p ... slideshow2

im backend gibt es ein .tmpl dafür, aber funktionieren tut es nicht und auch die angegebenen dateien (css...) sind nicht vorhanden

herzlichste grüße!

Musst du die fehlenden Dateien nicht erst herunterladen, von der angegebenen Projektseite???

Die Basic-Version klebt hier noch fest und kommt noch nicht so richtig in Schwung.
Ich hoffe in den nächsten Tagen.

Knut

@pepe: ja, richtig... nur in der wiki fehlt die entscheidende php-datei

@knut: das wäre super, wenn du die basic-version releasen könntest. das ganze sieht für mich bisher nach der 'schönsten' lösung in dieser richtung für phpwcms aus will auch gar nicht drängeln und baue erstmal meine seite drumherum... aber gierig warten werde ich trotzdem

Version "simple" im wiki verfügbar:



Knut

Hi!

How can I link each image with specific articles, using images <div> CP, with template slideshow2_simple_default.tmpl ?

In "caption:" field I enter text like this:
Article name|Article alt|?article_url

In Frontend, when clicked on picture instead link to article, I got "full size" picture (marked "click enlarge" in BE).
Caption in Images slideshow is ok - only my text "Article name" is shown.

When "click enlarge" is not marked, then link is correct (www.example.com/?article_url), but caption is not OK. In this case, caption is "Article name|Article alt|?article_url", but it should be only "Article name".


My version is V1.4.7, mootols working


Any help?

Hi,

I'll be watching this closely.

Knut

Hi Knut!

I have been trying to modify template file according to my needs,
Article name|Article alt|?article_url
so it can display image name as Article name, and picture link to be link from caption.
I didn't succeed in this.

Seems that some of {IMAGE*} RT's not working if used in template file.
I'm trying with modifying this line:
[CP_TRIG_STR] <a {CP_TRIG_REL_LIGHBOX} href="{ALT}"><img id="slide-{CP_TRIG_CLASS_ID}" src="{IMAGE_REL}" width="{IMAGE_WIDTH}" height="{IMAGE_HEIGHT}" alt="[CAPTION]{CAPTION}[/CAPTION][CAPTION_ELSE]{IMGNAME}[/CAPTION_ELSE]" style="{CP_TRIG_WIDTH_HEIGHT} {CP_TRIG_LEFT_TOP}" /></a>[/CP_TRIG_STR]


Still I didn't manage to get what I want.
Maybe I'm not at correct path for problem solving?

Any help about this issue?

Anybody?

Should it not be (correct):

Article name|Article alt|index.php?alias

pepe wrote:Should it not be (correct):

Article name|Article alt|index.php?alias

Hi Pepe!

I tried as you instructed, but no luck.
When Article name|Article alt|index.php?alias is used as image caption, and click enlarge is not selected, then I have same problem described above (link on picture is correct index.php?alias, but image alias is whole description field "Article name|Article alt|index.php?alias").

Did you try to change "alias" into the respective alias?

claus wrote:Did you try to change "alias" into the respective alias?

Hi Claus!

I'm not sure how to set respective alias...
Can you give me an example, please?

One page has an alias index.php?"my-good-page", the other is aliased index.php?"my-other-good-page" and so on. Every page has it's own alias.... but you know.
I was just wondering if you plain wrote "index.php?alias" where "alias" seems to be a place holder only... or am I completely wrong?

Claus,
hm, I tried this variants:

1)
Article name|Article alt|?my_article_alias

2)
Article name|Article alt|index.php?my_article_alias

Is this what you are asking?