Page 3 of 5
Posted: Thu 16. Feb 2006, 13:57
by rushclub
wenn du am mac sitzt öffne mal das dokument in bbedit und ersetze alle leerzeichen. war bei mir schon oft das problem, dass in den dokumenten irgendwelche (nicht sichtbaren) sonderzeichen waren. danach gings dann immer.
rush
Posted: Thu 16. Feb 2006, 14:00
by chip_rider
rushclub wrote:wenn du am mac sitzt öffne mal das dokument in bbedit und ersetze alle leerzeichen. war bei mir schon oft das problem, dass in den dokumenten irgendwelche (nicht sichtbaren) sonderzeichen waren. danach gings dann immer.
rush
Ich habe keinen MAC. Ich weiss wer einen hat und auch mit PHPwcms den Einstieg versucht (Werde ihm das ausrichten). Aber DANKE trotzdem....
++++++++++++++++++++++++++++++++++++++++++++
NA SOWAS:
ICH HABE AUCH DIE VERSION 1.2.5 AM SERVER UND DORT FUNZT ES EINWANDFREI {SHOW_CONTENT}! KANN SEIN DAS ES IN DER VERSION 1.2.6 EINEN FEHLER GIBT?
WAS HÄNGT ALLES ZUSAMMEN MIT SO EIN RT? DANN KÖNNTE ICH NACHSCHAUEN OB SICH ETWAS FALSCH ÜBERSCHRIEBEN HAT. DENN ICH HABE MEHRERE MODULE INSTALLIERT!
++++++++++++++++++++++++++++++++++++++++++++
Posted: Thu 16. Feb 2006, 14:20
by rushclub
bei mir läufts mit 1.2.6. daran liegt es also nicht.
rush
Posted: Thu 16. Feb 2006, 14:57
by chip_rider
rushclub wrote:bei mir läufts mit 1.2.6. daran liegt es also nicht.
rush
STOPT DIE SUCHE!
Ich habe den Fehler wahrscheinlich gefunden..... Es dauert aber noch ein bischen bis ich alles getestet habe. Melde mich in 30 min.
Posted: Sun 19. Feb 2006, 11:11
by KIer
when I use this {show_content} code, what I got on my page is only the cotent with the ID:1 is showing up, no matter which page I'm on. what is the problem??
Posted: Sun 19. Feb 2006, 14:25
by 1996 328ti
KIer wrote:when I use this {show_content} code, what I got on my page is only the cotent with the ID:1 is showing up, no matter which page I'm on. what is the problem??
I hate to ask the obvious, are you coding it as {SHOW_CONTENT:xxx}
Posted: Tue 8. Aug 2006, 00:59
by Peekay
Great RT
but if you use this and want the CSS of your page to validate you MUST add at least 1 pixel BEFORE and AFTER each content part.
A conditional argument to add a '0' top and bottom margin if none is specified would be a nice enhancement.
Posted: Wed 9. Aug 2006, 13:33
by allison
I use RT {SHOW_CONTENT} in ver 1.2.8 but I only get the blank page. I'm sure that I done evrything as exactly as the guide. In ver 1.2.6 everything is good. Anybody face this case? Susgestion?
Posted: Thu 17. Aug 2006, 11:50
by ff123
Hi, I have a
bugreport 
When using show_content replacement tag, it happens that the image rendering does not work correct. The image wont be resized by GD somehow.
Like here, click on the certificate image right-under:
http://www.stichtingflash.nl/stflash_startpagina.phtml
In the original content part it works correct:
http://www.stichtingflash.nl/iso9001.phtml
Regards, groeten,
vuurvos
Posted: Fri 18. Aug 2006, 15:11
by larmann
Can somebody delete this entry? I made it by mistake. This RT is an excelent tool.
Posted: Mon 18. Sep 2006, 23:56
by ssyfrig
allison wrote:I use RT {SHOW_CONTENT} in ver 1.2.8 but I only get the blank page. I'm sure that I done evrything as exactly as the guide. In ver 1.2.6 everything is good. Anybody face this case? Susgestion?
I have the same issue ...
fixed: {SHOW_CONTENT:CP,12,20,45,117}
http://www.phpwcms.de/forum/viewtopic.p ... howcontent
greez Sven
Posted: Thu 28. Sep 2006, 10:35
by JensZ
Allison: The show_content tag is included in 1.2.8, but works slightly different (see other posts)
I think you can remove the show_content.php file from frontend_render.
Jens
Posted: Thu 14. Dec 2006, 20:30
by phalancs
what if i do not want to only call content parts but the whole article??
Posted: Thu 14. Dec 2006, 22:59
by pepe
...
New replacement tag {SHOW_CONTENT:MODE,id[,id[,...]]} - the enhanced version of Jens Zetterström's mod.
* CP - list of Content Parts | id = id of the content part, one or more possible, comma seperated.
* CPA - ascending list of Content Parts but based on selected article | id = id of article, comma seperated
* CPAD - same as CPA, but descending (this slows rendering)
Posted: Fri 15. Dec 2006, 00:23
by StudioZ
phalancs wrote:what if i do not want to only call content parts but the whole article??
Hi Phalancs,
Have you tried this way:
{URL:{SITE}index.php?id=17,34,0,0,1,0}
Yves