Page 3 of 3
Posted: Tue 20. Mar 2007, 10:12
by juergen
Hi stemmen,
I just took a deeper look for the domain... There are problems with the DNS Server itself, with my pingplotter I am not able to resolve it. BTW. First domain with this prob at all ... looks like a 'nooneisallowedanything firewall config'
It just says: Destination unreachable.... looks like handbrew network
Code: Select all
Target Name: stephanie.dk
IP: 195.47.247.74
Date/Time: 20.03.2007 09:46:57
1 0 ms 0 ms 0 ms 0 ms 0 ms 0 ms 0 ms 0 ms 0 ms 0 ms fritz.fonwlan.box [192.168.178.1]
2 * * * * * * * * * * [-]
3 6 ms 6 ms 7 ms 7 ms 6 ms 7 ms 7 ms 6 ms 6 ms 7 ms [217.XXX.78.54]
4 21 ms 21 ms 22 ms 21 ms 21 ms 21 ms 21 ms 21 ms 21 ms 21 ms ams-e4.AMS.NL.net.DTAG.DE [62.154.5.29]
5 22 ms 21 ms 21 ms 21 ms 22 ms 22 ms 22 ms 21 ms 22 ms 22 ms ams16-core-1.tengigabiteth6-0.swip.net [195.69.145.139]
6 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms ams17-core-1.gigabiteth2-0-0.swip.net [130.244.205.166]
7 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 32 ms 33 ms cop2-core.pos1-0-0.swip.net [130.244.205.149]
8 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms 33 ms pos4-0.val2-core.dk.tele2.net [130.227.2.85]
9 33 ms 34 ms 33 ms 33 ms 33 ms 34 ms 33 ms 33 ms 33 ms 33 ms srp9-0.val8-core.dk.tele2.net [130.227.247.51]
10 34 ms 34 ms 37 ms 34 ms 165 ms 33 ms 34 ms 36 ms 34 ms 33 ms ge1-1.gc-bo-core3.dk.tele2.net [130.227.2.126]
11 -32764 ms 25 ms 26 ms 25 ms 25 ms 25 ms 25 ms 193 ms 25 ms 24 ms ge.netgroup.cust.dk.tele2.net [130.227.25.154]
12 25 ms 26 ms 27 ms 25 ms 25 ms 26 ms 25 ms 25 ms 26 ms 25 ms ge1-25.ar0.ba.cph.ngdc.net [217.116.255.25]
13 * * * * * * * * * * [-]
Just let this know your hoster... no reverse dns entry and lots of probs with the server configuration.
Jürgen
Posted: Tue 20. Mar 2007, 16:48
by stemmen
My ISP says it is because they are running Safe Mode ON, which I do not understand. All my other wcms-sites are runnings on the same ISP's server without problems and when installing 1.3.0 it "says" that Safe Mode is OFF.
However, my ISP says it is ON - what do I do now? How do I configure?
Posted: Wed 21. Mar 2007, 16:34
by stemmen
I just installed the cms on a another domain to test it, but the problem is the same:
http://www.jantheman.dk/cms/login.php
Everything went well during setup so I just do not understand the problem
Posted: Wed 21. Mar 2007, 22:04
by stemmen
Just for the hell of it, I installed 1.3.0. on another domain.
http://jlhdesign.dk/login.php
Still no change - did everything right
PS. Older versions 1.2.6 or 1.2.8 can be installed without ANY problems...
Posted: Thu 22. Mar 2007, 15:42
by stemmen
My FTP-programme changes letter size when transfering files (e.g. FCKeditor2 becomes fckeditor2). Does this cause a problem?
And what is this prepend name table or fix? Should I wing it or not?
Posted: Thu 22. Mar 2007, 15:56
by Jensensen
This IS a fundamental problem!!! You should have to start over and upload all files again, but fix FTP-problems first.
prepend name can be left clear '' as is.
useful, if you have some more server apps using the same database. so this issue is rather just for 'orientation' when browsing database.
or in that cases, when you have multiple installations of phpwcms running on one host.
greetz
Posted: Thu 22. Mar 2007, 16:18
by stemmen
Thanks - I think that lowercasing the letters may be the problem. I just installed older versions with the same problem.
I will try another FTP-programme
Posted: Thu 22. Mar 2007, 17:28
by flip-flop
(e.g. FCKeditor2 becomes fckeditor2......
That is right. In V1.30 the name bccomes lower case.
The most Unix/Linux installations are working in case sensitiv mode.
Knut
Posted: Thu 22. Mar 2007, 21:51
by stemmen
Hmmm - actually it helped when I changed FTP-Client. Now everything looks exactly like the files downloaded for SourceForge (e.g. ConvertCharset is now ConvertCharset and not convertcharset).
I am in.... Weeeee
Posted: Thu 22. Mar 2007, 21:57
by flip-flop
Oh no, only the path and file names around the fck editor was changed.
Knut
Posted: Thu 22. Mar 2007, 22:09
by Jensensen
Upload ALL files of the distribution 'as is' --> WITHOUT ANY conversation, changes of line feeds, character set and so on!!!
ALL files need to be EXACTLY the same on remote as on your local directory!!
NO CHANGES ANYWHERE!!!!!
As flip-flop mentioned, on unix systems ALL files are CASE SEnSiTivE!!
Posted: Fri 23. Mar 2007, 13:35
by stemmen
Dear Flip-Flop, Jensensen etc.
I did exactly that. Now everything looks like in the local directory. I do not know why my preferred FTP-client (Total Commander) converted the letters and did not consider Case SenSitiviTy.
I used a different FTP-client. All is OK. I hope this also helps Kens who started the threat and others who may have same problems. I think we covered it all.
To everyone - thanks for your tips, help and time...
Posted: Fri 23. Mar 2007, 14:01
by flip-flop
Posted: Sat 24. Mar 2007, 02:43
by stagai
Anyone else having this problem still?
I upload files using secure shell, so i don't have a problem with letters being capitalized or going to lower case.
I tried installing 1.3.0 and 1.2.9 but I get a blank page with the login.php page.
I installed 1.2.6 and it worked the first time.
Tried 1.3.0 again just the way I did with 1.2.6 and no luck.
